For a secure set up on different surfaces, the legs are fitted with rubber feet. To allow uneven ground andstraighten the camera bracket with stable, each legs can be adjusted in height and degrees .
Unlike other similar products, you can also adjust every single slider legs in 16 angles. It allows sliders to beset up in anywhere. By the way , the legs are very light and very easy to equip.
The legs are very light and easy to set up. Also through two guide pins, the legs can be stably attach very well.
There are two ways to adjust friction in our slider. First option to adjust friction is loosening and tightening thered knob. The tension can be adjusted instantly. We designed that the spring is putted in the end of knob. Itavoids the knob touching rail too excessively.
Second option to adjust friction is use hex wrench that we provided. If you want to adjust tension more precisely you should use wrench to do that. More detail instruction can be found on our web site (www.konova.co.kr). Also you can check “Set up guide ” that packaged with slider together.
We put heat treatment concentrically on the abrasive part and precisely grind it to make its surface roughnessto 1.5mm. This process is critical technology (it called “Super-finishing”, There`s four steps for precisely grinding)on slider. When we put heat treatment with Super-Finishing the shaft appearance looks like mirror. Not onlysplendid look but also decrease surface roughness. (The surface roughness figure : lower is better.)
In addition, double row angular contact bearings in K2 slider makes complete rolling motion. It makes quietoperation with smooth. Those whole process makes sliders are much better quality.
The shaft straightly inserted in the rail is made of high carbon bearing steel and enhanced surfacehardness to HrC60 by high frequency treatment. (The hardness figure is higher is better.)We`ve enhanced surface hardness in every material in ourslider. (*Hardness of general stainless is Hrc40)
The slider can either be oriented close to the ground attached to the included legs, or in various combinations ontripods. For mounting on tripods you will find connecting threads at the bottom of the slider (right, center and left)For vertical movements, the slider can be mounted on a tripod.
Double row angular contact bearings which are over P5 grade allow running precision. (0.02mm in 6m without accumulation) In our sliders, If got any wobble from axial direction and radial-horizontal.
This model is available in 48 cm,60cm, 80cm, 1m, and 1m20cm sizes.You can choose your length option to fit your shooting condition.And you can use our sliders to make movies, wedding videos, advertisement, landscape shots very comfortably.
The crank handle kit and motorized kit will be released soon.The crank handle kit is fit for all of K2 sliders (If you have K3080 you need to purchase with “UPGRADE KIT”).It can makes more professional cinematography.When you using this one you can shoot Accurately.
Video Head KB-0529H is simple video head that allow panning and tilting. Include bubble level for setup balance easily.
Video Head KB-0529H is professional fluid head also allow panning and tilting. It performed verysmoothly.
Ball head BWF-6665H has a reliable quick-change mechanism, which facilitates the change fromthe tripod into the hand. The Ball Head is equipped with a 1/4 inch camera connection as well as a1/4 and 3/8 inch tripod connection.
Qucik plate BKH-BB20 (Quick release) is one of important options when you using DSLR equipments.If you want to set up on tripod, stand quickly, that is what you need. You may decrease your set uptime with BKH- BB20.
Light stand BMK-L2600FP is professional tripod. It can extend to 9.5ft (1330mm) high. Even though,general tripod cant extend too high, This stand makes extremely high view shooting. It also fit toBMK- M11019 (stand adapter). makes more dramatic & cinematics video.
This ARTICULATING ARM BFV-8.3 for attach DSLR accessories (such as, monitors, led lights etc.).It has 3/8inches screw thread. There`s two option for the length. Those are 8.3” and 4.2”.
This useful stand adapter (BMK-M11019) is for slider set up diagonally, and makes your shootingenvironment be comfortably. Those allow you to get dramatic push/pull and side slides shots.